Nancy Watts Lamp Shades November 02nd, 2018 - 20:53:26
Ceiling lamp with free decorative, LED light bulbs as a base. I use glue toe board measure, then cut 72 by 16 centimeters piece drill. Three holes for wires from L shape aluminum profile. I made a frame. It allows me to get some height space for wires and connectors Plus also hanging issue to form a union profile to need a shape. I cut out a V-shaped piece at each bending point. Slowly, Bend each cut to get nice 90 degrees, angle, drill, holes, and frame and after that, in the good border with screws and secure frame in place.
The same technique made the second smaller frame, which will be screwed to the ceiling and allowed to secure lamp base in place. Drilled. Four holes in both frames to make connection point both frames mounted together, will look like this apply two coats of clear matte varnish time for wiring. Nothing special just result: a 27 line holder require which could be bought at any hardware or electric store on each wire.
I'm in a mod, the fixed wire at a specific length, stripped twisted and soldered wires, with hot glue, good wires to keep them in specific place attached to smaller wire connectors to connect lamb to the grid. I used three big: the creative LED lamps. They are 12 centimeters of diameter and use only one point in watts of power, so they are totally not from main lighting source, but will be a very nice accent in the apartment. This is a super simple lamp to make, but at the same time, it looks very nice and cozy with this build.
Copyright © 2019 corpfinblog.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Buffet Lamps floor lamps modern wall clock double bathroom vanity solar string lights plastic soap dispenser toilet seat antique rocking chair round tablecloth best bathroom sinks tablecloth outdoor light armchair.